Getting Your Glass Kilns Back Online (Fast)
There’s nothing worse than a production line grinding to a halt because some OEM part is backordered. It’s frustrating, it’s expensive, and it leaves you staring at a dead machine. That’s where we come in. We build custom infrared heating lamps and get them to your door in 7 days. We aren’t talking about “close enough” parts. We’re talking about matching the exact heat profile of your current setup so you can just plug in and get back to work. Getting the power right We don’t do guesswork. If your kiln is wired for a heavy-duty industrial grid, we build the lamp to handle it. If the voltage or wattage is off, you’re asking for trouble. The lamp will either pop the second you flip the switch or it won’t even get the glass warm enough to soften. To stop that from happening, we calibrate the filament density. You get the same wattage per centimeter as the original, which means your timing stays exactly where it needs to be. Built for the heat Glass kilns are brutal on equipment. To keep up, we use high-purity quartz glass that can take a thermal shock without cracking. Depending on what you’re actually making, we can tweak the coatings to change how the heat hits the glass. Short-wave lamps dig deep into the material, while medium-wave is your go-to for surface heating. Plus, we use standard industrial connectors. It’s a simple drop-in replacement—no need to spend your afternoon rewiring the control cabinet. A quick heads-up on speed Moving this fast means we need the right info from you. We need your exact dimensions and electrical specs right out of the gate. And here is a pro tip: high-wattage tubes put a lot of stress on your reflectors. If yours are pitted or looking oxidized, a brand-new, high-output lamp might actually overheat the housing. Do yourself a favor and check your cooling fans and reflectors before you wire everything up. We’ll handle the hardware; you just make sure the machine is ready for the heat.